WestCoastPaddler.com

 Home / About  Paddling Locations Gallery  Kayak and Accessory Building  Desktop Wallpaper Images  Community

> Building Kayaks and Kayak Accessories > Building the Pygmy Coho

March 17 - Forms wired in place
The forms are held in place with a single stitch through the form and the hull. This is a bit inconvenient as they tend to flop around as panels move during the stitching process. Blocks of scrap 2x4 did a fairly good job of holding them roughly in place.
IMG_9049.jpg IMG_9050.jpg IMG_9062.jpg