WestCoastPaddler.com

 Home / About  Paddling Locations Gallery  Kayak and Accessory Building  Desktop Wallpaper Images  Community

> Building Kayaks and Kayak Accessories > Building the Pygmy Coho

July 22 - Fitting the coaming riser
To make sanding easier after installing the coaming, I sanded the deck area around the coaming before gluing the coaming riser in place. I then used clamps to hold the riser in place while I marked it out for cutting.

I also pre-sanded the outside of the coaming riser to make sanding easier later -- getting into the area underneath the coaming lip is a bit tricky -- presanding will eliminate most of the need to sand in a tight spot.
IMG_coho088.jpg IMG_coho089.jpg IMG_coho090.jpg