WestCoastPaddler.com

 Home / About  Paddling Locations Gallery  Kayak and Accessory Building  Desktop Wallpaper Images  Community

> Building Kayaks and Kayak Accessories > Building the Bear Mountain Enterprise

Smoothing things over
I'll be working towards making the interior of the kayak as smooth and snag-free for gear as I can. The bow and stern stems have a sharp 90 degree edge on the inside edge, which will be fully exposed. While not a huge issue, anything sharp-edged could cause wear on gear that is stowed. For this reason, I used a router to round the inside edges of the stems. Sanding the edge would work as well, but would take longer.
---

There is an ongoing discussion about this build in our forums in the "Boat and Accessory Building" section. If you have any questions or comments, please post them in the thread titled "Bear Mountain Enterprise - Building Q&A"
IMG_5374.jpg IMG_5702.jpg IMG_5705.jpg