Home / About  Paddling Locations Gallery  Kayak and Accessory Building  Desktop Wallpaper Images  Community

> Building Kayaks and Kayak Accessories > Building Scale Model Stitch & Glue Kayaks

Tacking of plans to the panel material.
And then from the centre, each half sheet is sprayglued and then carefully ‘rolled’ down onto the styrene. (Starting from the centre and moving each way, minimizes the possible screwups of laying down large flat sheets of paper.)
The formsheets are also glued to doorskin plywood scraps. Spray glue is not necessary here, just a skim of wood glue works fine. (this model is completely made from scrap ply and sheet styrene left over from a previous model a few months back)
a04-solitmdlsm.jpg a05-solitmdlsm.jpg a06-solitmdlsm.jpg