|
|
|
Equipment that we use
We use a lot of different equipment on our paddling adventures. The following are the boats we use to collect information for this site. For more information about other equipment that we use, please select a menu item on the left or see the Gear Talk section in our discussion forums.
The boats
Pygmy Boats Limited Edition Sapele Coho built by Dan
Length: 17 feet 6 inches Beam: 23 inches Construction Type: Stitch & Glue
Construction Materials: Sapele plywood, Jarrah accents, fiberglass, epoxy
Dan's Delta 18 by Delta Kayaks
Length: 18 feet 8 inches Beam: 23.5 inches Construction Type: Thermoformed
Construction Materials: ABS Plastic
Osprey Double built by Dan from a kit produced by Pygmy Boats
Length: 20 feet Beam: 30 inches Construction Type: Stitch & Glue
Construction Materials: Okoume plywood, fiberglass, epoxy
Mark's Romany Explorer by Nigel Dennis Kayaks
Length: 17 feet 8 inches Beam: 21.5 inches Construction: Fiberglass
Tern 14, built by Mark from a kit produced by Pygmy Boats
Length: 14 feet Beam: 23 inches Construction Type: Stitch & Glue
Construction Materials: Okoume plywood, fiberglass, epoxy
Steve's Quest by Seaward Kayaks
Length: 19 feet Beam: 21.5 inches Construction: Kevlar
Steve's Seayak by Prijon Kayaks
Length: 16 feet Beam: 23 inches Construction: Blowmolded plastic
Andy's handcrafted Redfish Spring Run built by Daren Neufeld
Length: 16 feet 9 inches Beam: 24 inches Construction: Cedar strip
Previous boats
Dan's hand-crafted Greenland style skin-on-frame built by Daren Neufeld
Length: 18 feet Beam: 24 inches Construction Type: Traditional Skin-on-Frame
Construction Materials:: Red Cedar, Yellow Cedar, Mahogany, Ballistic nylon
Andy's Cape Horn by Wilderness Systems
Length: 17 feet 2 inches Beam: 23 inches Construction: Rotomolded plastic
|
|
|
|
|
Home/About
:: Community
|
|
